EasyPage 2.0 is a very simple, and efficient program that will dial your digital pager after you have received a telephone call. Ideally, EasyPage can be used at your home office to alert you that you have a message on your telephone answering machine. Configuring EasyPage takes about 60 seconds to complete.
HARDWARE CONFIGURATION
It is recommended that you plug the telephone wire coming from your wall outlet into the LINE input on your modem. (any baud rate modem will work) Then run a cord from the modem input labeled PHONE to the input on your telephone answering machine labeled LINE. Then plug your phone into the telephone answering machine input labeled PHONE.
INSTALLATION
If you have received EasyPage as a compressed file, simply uncompress the file onto a floppy disk.
From Windows Program Manager, choose RUN and then type A or B:\SETUP, and press enter. The EasyPage installation program will install the program to your hard disk, and create a Windows program group and icon. Simple click on the EasyPage icon to start the program.
